User's Manual
Page 5
FIGURES AND TABLES
figure 3-1 Configuration of an ION-M17P/17P/17P remote unit................................ 15
figure 3-2 Remote unit, front view, fully RF equipped ............................................... 16
figure 3-3 Remote unit, backside, fully RF equipped ................................................ 16
figure 4-1 Wall mounting........................................................................................... 21
figure 4-2 Pole-mounting kit...................................................................................... 22
figure 4-3 Pole mounting .......................................................................................... 23
figure 4-4 Mounting procedure for fan protection...................................................... 24
figure 4-5 Connector flange of ION-M17P/17P/17P.................................................. 26
figure 4-6 RS232 connector...................................................................................... 27
figure 4-7 Grounding bolt with loosened hex nut ...................................................... 27
figure 4-8 Grounding bolt, schematic view................................................................ 27
figure 4-9 AC mains plug .......................................................................................... 29
figure 4-10 DC mains plug........................................................................................ 29
figure 4-11 Protective-plug assembly ....................................................................... 31
figure 4-12 Tube-kit installation................................................................................. 34
figure 5-1 Alarm triggering ........................................................................................ 40
figure 5-2 Flange connector, 5 poles ........................................................................ 41
figure 5-3 Flange connector, 7 poles ........................................................................ 41
figure 5-4 Alarm inputs and outputs, standard.......................................................... 42
figure 7-1 Installation drawing................................................................................... 47
table 1-1 List of international contact addresses 12
table 4-1 Specified torques 20
table 4-2 RS232 connector, pin assignment 27
table 5-1 Status LED alarms 40