User's Manual

4. Commissioning
Page 28
Manual ION-M17EP_19P MF0150ACA.docx Manual for ION-
M
17EP
/19P
10. Continue with the winding area
using lint-free wipe drenched with
isopropyl alcohol.
11. Continue with the inside mating
surface of the inner ring.
12. Clean the outside surface of the
center pin.
4.2.7. Antenna Cable Connector Assembly
The figures in this chapter illustrate the connection procedure and do not show the
actual RU.
1. What is needed for the connector
assembly?
a. Torque wrench.
b. (Adjustable) counter
wrench