User's Manual

2. Introduction
Manual ION-M17EP_19P MF0150ACA.docx Manual for
ION
M
17EP
/19P
Page 15
The ION-M17EP/19P is available in a multi-band configuration supporting 1900 MHz
and 1700/2100 MHz. It has been specifically tested and optimized for GSM,
CDMA2000, WCDMA, and LTE/LTE-A signals. Furthermore, it is provisioned for future
modulation schemes and frequency bands.
The ION is easily set-up and supervised via a graphical user interface (GUI). Remote
Units can be commissioned through the use of built-in test equipment. An auto-levelling
function compensates for the optical link loss making installation easy and quick. The
entire system as well as complete network of systems can be managed remotely most
efficiently by CommScope`s A.I.M.O.S, which includes alarm monitoring, task
automation, inventory management and many more features. Should a sophisticated
interface not be required, the master unit can be directly connected to the alarm
interface of a base station via relay alarming.
Features at a glance
 Multi-band, multi-operator support
 Reduced visual impact form factor
 Efficient, high power amplifier
 Single fiber for multiple bands and multiple remotes
 Comprehensive operations and management system for configuration and
alarming
 OMC with SNMP according to X.733 standard
 With reference to 3GPP TS25.143/ TS25.106/ TS36.143/ TS36.106 and
3GPP2C.S0051-0
 Easy installation and commissioning
 Supporting LTE-Advanced, inclusive 256 QAM