User's Manual

2. Introduction
Page 14
Manual ION-M17EP_19P MF0150ACA.docx Manual for ION-
M
17EP
/19P
2. Introduction
2.1. Purpose
Cellular telephone systems transmit signals in two directions between base transceiver
station (BTS) and mobile stations (MS) within the signal coverage area.
If weak signal transmissions occur within the coverage area because of indoor
applications, topological conditions or distance from the transmitter, extension of the
transmission range can be achieved by means of an optical distribution system.
Such a system contains an optical Master Unit and several Remote Units. The number
of the Remote Units depends on the hardware and software configuration. The Remote
Units are connected to the Master Unit with optical links. The optical loss must be less
than 10 dB inclusive optical couplers or splitters.
The Master Unit is the connection to the base transceiver stations. The configuration
of a Master Unit depends on the number of the Remote Units and the frequency range.
WDM (Wave Division Multiplex) filters are integrated in the optical modules. For the
UL, a wavelength within 1546 nm – 1550 nm is used. For the DL, a wavelength of 1310
± 10 nm is used. The maximum output power for the UL and DL is 6.7 mW.
2.2. ION-M17EP/19P
The ION-M17EP/19P is a multi-band multi-operator Remote Unit with various
Extension Units (EUs). It is used in conjunction with a Master Unit (MU) in the ION
optical distribution system. This system transports multiple frequency bands
simultaneously (1900 MHz and 1700/2100 MHz), providing a cost-effective solution for
distributing capacity from one or more base stations. By supporting the entire AWS-3
spectrum, faster and more reliable wireless service is ensured and network quality can
be improved
The ION-M17EP/19P transports signals on the RF layer in a very inexpensive manner.
This means that multiple operators and multiple technologies are moved
simultaneously from a cluster of base stations to a remote location over the same fiber.
The ION optical distribution system is a cost-effective coverage solution for dense
urban areas, tunnels, subway, airports, convention centers, high-rise buildings and
other locations where physical structures increase path loss. It has been specifically
designed to reduce zoning problems and to provide homogeneous coverage. The
compact, mechanical design is specifically architected to mount inside of poles or
along side structures in such a way that it has a minimal visual impact.