User's Manual

User’s Manual for
ION-M4/8 19"
Page 38 M0132AVA_FCC.doc
6.2. REPLACEMENT OF COMPONENTS
6.2.1. Replacement of Amplifier and Optical Plug-in Modules
For replacement of all plug-in modules, i.e. the OTRx, DPX and the amplifier
modules except for the power supply modules, the following procedure applies:
) Note : Before plugging or unplugging any of the modules, disconnect
mains by unplugging the IEC power connector.
) Note : As the modules are heavy, take appropriate measures to avoid
injury.
) Note: Before disconnecting any cables, label any unlabelled cables to
ensure correct re-connection.
figure 6-1 OTRx and amplifier modules, locking device
Locking device with spring
OTRx module Amplifier module