User's Manual

User’s Manual for
ION™-M17HP/19P (M-cab)
Page 46 M0145A0A.doc
7.2. SPECIFICATIONS
7.2.1. Electrical Specifications
Electrical
Mains power 100 Vac to 240 Vac
max. temp., fully loaded 900 watts
Power supply
Power consumption
room temp. idle 550 watts
Optical Link
Connectors E2000/APC 8°
Optical return loss 45 dB minimum
Fiber type Single mode E9/125 µm
Optical link budget 0 dB to 10 dB
1900 MHz 1700/ 2100 MHz 700 MHz
Input power @ OTRx master side
+3 dBm
composite
+6 dBm
composite
+3 dBm
composite
Minimum BTS input power
1)
-19 dBm -16 dBm -19 dBm
RF Interface
1900 MHz 1700/ 2100 MHz 700 MHz
Number of connectors 4 4 4
Master Unit
System optimized for
BTS power
33 dBm
43 dBm
Connector N female
Output power See band specification
Antenna Port
of RU
Return loss 15 dB typical
1700/ 2100 MHZ (AWS)
Frequency range
UL
DL
1710 MHz to 1755 MHz
2110 MHz to 2155 MHz
Number of carriers 1 2 4 8
CDMA
46 dBm 43 dBm 40 dBm 37 dBm
UMTS
46 dBm 43 dBm 40 dBm 37 dBm
RF output power
per carrier
2)
LTE
46 dBm 43 dBm
4)
40 dBm 37 dBm
Spurious emission <-13 dBm / 1 MHz
Adjacent channel power -48 dBc
DL output tolerance over frequency ±1.0 dB
DL output tolerance over temperature ±0.5 dB
3)
ICP3 optimized NF optimized
UL Input ICP3 -12 dBm -18 dBm
7 dB 4.5 dB
UL Noise figure (NF)
5)
11 dB max. 6 dB max.
DL 40 dB 40 dB
Gain
UL 40 dB 47 dB
1)
Additional DL gain (22 dB) available in case of low power BTS
2)
Applicable to single modulation mode only.