User's Manual

User’s Manual for
Remote Unit ION™-M17/17P/17P
Page 12 MF0143AWA.doc
The ION is easily set-up and supervised via a graphical user interface (GUI). Remote
units can be commissioned through the use of built-in test equipment. An auto-
levelling function compensates for the optical link loss making installation easy and
quick.
The entire system may be monitored remotely via an Andrew OMC. This is a
comprehensive management platform with SNMP protocol and X.733 standard
implemented. Should a sophisticated interface not be required, the master unit can
be directly connected to the alarm interface of a base station via relay alarming.
 3 sector multi-operator support
 Reduced visual impact form factor
 Efficient, high power amplifier
 Single fibre for multiple sectors
 Comprehensive operations and management system for configuration and
alarming
 OMC with SNMP according to X.733 standard
 Easy installation and commissioning
2.3. COMPONENTS OF THE ION-M17P/17P/17P REMOTE UNIT
2.3.1. Fan-Protection Kit
In order to protect the fan unit (e.g. against rain), a protective cover to be mounted
over the air inlet is delivered with the unit. For indoor applications, mounting of the
fan-protection kit is not mandatory.
For more details see chapter 3.1.4 Mounting of Fan Protection.
2.3.2. Accessories
For the accessories available for the remote unit, e.g. overcoat housing, connecting
box or iso-trafo kit, a separate manual is available.