Manualshelf

Installation Guide

ManualsBrandsAndrew Wireless System ManualsComputers & AccessoriesERA Repeater for cellular systems
31323334353637383940
M0201AJG_uc CommScope ERA
®
Medium Power Carrier Access Point Installation Guide
© Decemeber 2020 CommScope, Inc. Page 77
Replacing the Power Supply Unit (PSU)
CAUTION! Make sure the product label is upside down, the +35.5 VDC label is on the left and the -48 VDC is on
the right.
13 Reconnect the input and output connectors and tighten the associated terminal screws.
CAUTION! The connector pins are to the side of the screws farthest from the CAP M housing for both
connectors. These must be reassembled in the same location. Failure to follow this instruction may
result in damaged connectors.
CAUTION! Make sure the +35.5 VDC marking is on the left and the -48 VDC marking is on the right. Failure to
follow this instruction may result in a damaged PSU.