Manualshelf

Installation Guide

ManualsBrandsAndrew Wireless System ManualsComputers & AccessoriesERA Repeater for cellular systems
21222324252627282930
CommScope ERA
®
Medium Power Carrier Access Point Installation Guide M0201AJG_uc
Page 70 © Decemeber 2020 CommScope, Inc.
Replacing the Power Supply Unit (PSU)
10 Loosen the 3 Phillips head terminal screws for the Input connector and pull the connector upward to
remove it.
11 Loosen two Phillips head terminal screws for the Output connector and pull the connector upward to
remove it. Set aside the PSU for return to CommScope.
12 Place the replacement PSU next the CAP M with the two DC terminals on the left side and the three AC
terminals on the right side. It is very important to confirm that the replacement supply is the same type
as the original defective supply. The AC and DC supplies are not interchangeable.