Installation Guide

CommScope ERA
®
Medium Power Carrier Access Point Installation Guide M0201AJG_uc
Page 52 © Decemeber 2020 CommScope, Inc.
Installing CAP Ms
Attach a Hybrid Fiber Splice Box to the CAP M
Follow the procedure that is appropriate for this installation:
• "Attaching a Hybrid Fiber Splice Box for a Single Mount Installation” on page 52
• "Attaching a Hybrid Fiber Splice Box for a Dual Mount Installation” on page 54.
Attaching a Hybrid Fiber Splice Box for a Single Mount Installation
1 Hang the Splice Box onto the Single Mounting Bracket on the right-hand side of the CAP M, as shown
below.
The steps in this section pertain only to those installations that require the use of the optional Hybrid
Fiber Splice Box to provide fiber and power to the CAP M. If the optional Hybrid Fiber Splice Box is not
required for this installation, skip to "Grounding the CAP M” on page 56.
Single
Mounng
Bracket
Hybrid Fiber
Splice Box