Installation Guide

M0201AJG_uc CommScope ERA

Medium Power Carrier Access Point Installation Guide

DOCUMENT OVERVIEW

This installation guide provides a product overview of and installation instructions for the Medium Power

Carrier Access Point (CAP M), which allows transmission between CommScope ERA

equipment, antennas,

and Ethernet devices (such as WiFi and IP cameras).

Table 1 lists the CAP M models that this installation guide supports.

Document Revision History

This is the seventh release of the CommScope ERA

Medium Power Carrier Access Point Installation Guide. This

release

• adds new variant

Table 1. Supported CAP M Models

Part Number

Model Name

77 8 11 2 5-00 0x CAP M 9/ 1 8/2 1/26

78 2 04 7 8-00 0x CAP M 7E /8 0 -85 /17E/19

78 4 09 8 4-00 0x CAP M 80-8 5/1 7E/ 19/26

78 2 06 8 9-00 0x CAP M 23 / 23/ 25/2 5

78 3 52 6 9-00 0x CAP M 6/6 /7 E /7 E

78 3 35 9 7-00 0x CAP M 8/1 8 /2 1 /26

1 The “-000x” suffix provides additional information about specific CAP M

variants. Contact your local sales representative for further information.

For information on other ERA system components, refer to the ERA software and hardware user

documentation, which can be accessed on the CommScope DCCS Customer Portal (see "Accessing ERA

User Documentation” on page 81.)

For information on how to find the minimum software requirements for ERA hardware, refer to

"Hardware to Software Mapping Information” on page 81.