Manualshelf

Installation Guide

ManualsBrandsAndrew Wireless System ManualsComputers & AccessoriesERA Repeater for cellular systems
11121314151617181920
M0201AJG_uc CommScope ERA
®
Medium Power Carrier Access Point Installation Guide
© Decemeber 2020 CommScope, Inc. Page 13
CAP M Overview
Figure 9. OCTIS RJ-45 Reverse Lever (PN: 7760652) Mating Instructions
Special Instructions for GigaSPEED X10D Connectors
The GigaSPEED X10D 3095B CAT6A cable has a primary and an additional secondary locking tab. If the RJ-45
connector is inserted in the OCTIS shell with the tabs intact, the connector will fit but it may get stuck inside
the shell. To prevent this, both of these locking tabs must be removed before insertion into the OCTIS
connector shell.
Figure 10. GigaSPEED X10D RJ-45 Connector Tabs to Remove
1 Remove the secondary tab of the RJ-45 connector using wire cutters.
Figure 11. RJ-45 Primary Tab Removal