Installation Guide
CommScope ERA
®
Medium Power Carrier Access Point Installation Guide M0201AJG_uc
Page 8 © Decemeber 2020 CommScope, Inc.
CAP M Overview
Notch-Filter Connectors
The CAP M 7E/80-85/17E/19 and CAP M 80-85/17E/19/26 have two Notch-Filter connectors that are
reserved for future use. The connectors, which are closed by a jumper, have a protective cover. Do not
remove the protective cover or interfere with the jumper.
Figure 4. Notch-Filter Connector on the CAP M 7E/80-85/17E/19 and CAP M 80-85/17E/19/26
CAP M Hardware Options
The following sections describe hardware options for the CAP M.
Single Mounting Bracket
The Single Mounting Bracket (CommScope PN 7821955-xx) provides the mounting brackets required to
mount an CAP M to a wall or other vertical, flat surface. See "Mount a CAP M Using a Single Mounting Bracket”
on page 35.
Protecve cover over the
Notch-Filter connectors
Notch-Filter connectors
closed with a jumper