Installation Guide
Table Of Contents
- Table of Contents
- Document Overview
- Fiber CAP M2 Overview
- Plan and Prepare for a Fiber CAP M2 Installation
- Mount the Fiber CAP M2
- Connect the Cables to the Fiber CAP M2
- Powering on a Fiber CAP M 2
- Contacting CommScope
M0203AHA_uc CommScope ERA
®
CAP M2 with Fiber Interface
© August 2022 CommScope, Inc. Page 35
Connect the Cables to the Fiber CAP M2
3 Insert the SFP+ module into the port as shown below.
4 Feed the cable from the hybrid splice box through the CAP M2 port, as shown below, and assemble the
OCTIS LC Universal connector and insert it into the CAP M2 port as shown in Figure 2.