Installation Guide
Table Of Contents
- Table of Contents
- Document Overview
- Fiber CAP M2 Overview
- Plan and Prepare for a Fiber CAP M2 Installation
- Mount the Fiber CAP M2
- Connect the Cables to the Fiber CAP M2
- Powering on a Fiber CAP M 2
- Contacting CommScope
CommScope ERA
®
CAP M2 with Fiber Interface M0203AHA_uc
Page 12 © August 2022 CommScope, Inc.
Fiber CAP M2 Overview
Figure 2. OCTIS Universal Lever Assembly Instructions
Figure 2 and Figure 3 show the LC Duplex connector at the cable termination. The BiDi (single fiber) cable
termination follows the same OCTIS assembly instructions.