Installation Guide
Table Of Contents
- Table of Contents
- Document Overview
- Fiber CAP L2 Overview
- Plan and Prepare for a Fiber CAP L2 Installation
- Mount the Fiber CAP L2
- General Mounting Cautions
- Mounting CAP L2 with a Wall Mounting Kit
- Mounting a CAP L2 with an AC/DC Power Supply Kit
- Wiring the AC/DC Power Supply Kit
- Mounting a CAP L2 with a Hybrid Fiber Splice Box Kit (optional)
- Connect the Cables to the Fiber CAP L2
- Powering on a Fiber CAP L2
- Contacting CommScope
CommScope ERA
®
CAP L2 with Fiber Interface M0203A9B_uc
Page 42 © September 2022 CommScope, Inc.
Connect the Cables to the Fiber CAP L2
4 Insert the cable in the fiber optic port.
5 Replace the cover on the CAP L2.
Installing SFP+ Modules in the CAP L2 (optional)
See "SFP+ Module Kits” on page 11 for more information.
1 Install the hybrid splice box on the CAP L2 bracket. See "Mounting a CAP L2 with a Hybrid Fiber Splice
Box Kit (optional)” on page 28.
2 Loosen the eight torque screws on the cover located at the bottom of the CAP L2.
Fiber optic cable
inserted into CAP L2
port