Installation Guide
Table Of Contents
- Table of Contents
- Document Overview
- Fiber CAP L2 Overview
- Plan and Prepare for a Fiber CAP L2 Installation
- Mount the Fiber CAP L2
- General Mounting Cautions
- Mounting CAP L2 with a Wall Mounting Kit
- Mounting a CAP L2 with an AC/DC Power Supply Kit
- Wiring the AC/DC Power Supply Kit
- Mounting a CAP L2 with a Hybrid Fiber Splice Box Kit (optional)
- Connect the Cables to the Fiber CAP L2
- Powering on a Fiber CAP L2
- Contacting CommScope
CommScope ERA
®
CAP L2 with Fiber Interface M0203A9B_uc
Page 12 © September 2022 CommScope, Inc.
Fiber CAP L2 Overview
• Obtain SFP+ Module pairs (one placed in the TEN and paired with another in the Classic CAN) that are
appropriate for this installation. Table 8 identifies the available SFP+ Modules and the maximum range for
each.
Table 8. Supported SFP+ Modules
CommScope PN Description Maximum Range
76 6 05 1 1 SFP+, 10GBase-SRR, Multi Mode OM3 300m
OM4 400m
76 8 08 1 3 SFP+, 10GBase-LR, Single Mode 10km
78 0 32 4 7 SFP+, 10GBase CWDM-270 40km
78 0 32 4 9 SFP+, 10GBase CWDM-290 40km
78 0 32 9 1 SFP+, 10GBase CWDM-310 40km
78 0 32 9 3 SFP+, 10GBase CWDM-330 40km
78 0 32 9 5 SFP+, 10GBase CWDM-350 40km
78 0 32 9 8 SFP+, 10GBase CWDM-370 40km
78 0 39 0 0 SFP+, 10GBase CWDM-390 40km
78 0 39 0 2 SFP+, 10GBase CWDM-410 40km
78 0 39 0 4 SFP+, 10GBase CWDM-430 40km
78 0 39 0 6 SFP+, 10GBase CWDM-450 40km
78 0 13 3 0 SFP+, 10GBase CWDM-470 40km
78 0 13 4 0 SFP+, 10GBase CWDM-490 40km
78 0 13 4 2 SFP+, 10GBase CWDM-510 40km
78 0 13 4 4 SFP+, 10GBase CWDM-530 40km
78 0 13 6 0 SFP+, 10GBase CWDM-550 40km
78 0 13 6 3 SFP+, 10GBase CWDM-570 40km
78 0 13 6 5 SFP+, 10GBase CWDM-590 40km
78 0 13 6 7 SFP+, 10GBase CWDM-610 40km
78 3 22 0 4 SFP+, 10G BIDI TX1270/RX1330 40km
78 3 22 0 6 SFP+, 10G BIDI TX1330/RX1270 40km