Installation Guide

M0203A9B_uc CommScope ERA
®
CAP L2 with Fiber Interface
© September 2022 CommScope, Inc. Page 11
Fiber CAP L2 Overview
CAP L2 Accessories and Options
The Fiber CAP L2 accessories and options are described in the following sections:
• "Mounting and Power Kits” on page 11
• "SFP+ Module Kits” on page 11
• "OCTIS™ Universal Lever Assembly Kits” on page 13
Mounting and Power Kits
CAP L2 Mounting and Power Kits are described in the applicable installation process
SFP+ Module Kits
Contact your local CommScope sales representative to obtain the following components, as required, for this
installation.
• Per the installation plan, obtain either Single Mode Fiber (SMF) or Multi Mode Fiber (MMF) that is of
sufficient length to reach from the CAP L2 to a Classic CAN or TEN.
• All CAP L2s ship with the required Optical OCTIS Kit (PN 7770612).
4
None Proprietary 4-pin DC power
connector
Connects to a local or remote DC power supply. The CAP L2 does not ship with
any power cables preinstalled; you need to order the power cable assembly
that is appropriate for this installation.
• 7774061: Cable Assembly, CAP L Local Power Jumper, 0.5 m
• 7816237-xx: Cable Assembly, CAP L Local Power Jumper, 3.0 m
5
ANT 3 4.3-10 RF connector Connect to external antennas or to one of the ports on a multiple input
cross-polarized antenna via 50Ω coaxial cable. The antenna ports ship with
dust caps that can be discarded upon unit installation.
6
ANT 4 4.3-10 RF connector Connect to external antennas or to one of the ports on a multiple input
cross-polarized antenna via 50Ω coaxial cable. The antenna ports ship with
dust caps that can be discarded upon unit installation.
7 None Power and Status LED See "Connectors and LED for the Fiber CAP L2” on page 9
8
Port 2 Port 2 OCTIS Connector Port to pass fiber cable to the SFP+ module. The port seal is the OCTIS Universal
connector PN 7847069. Connecting the fiber cable to the CAP L2 requires
removing the service lid.
Table 7. Mounting and Power Kits
Mounting/Power Kit CommScope PN See
Wall Mounting Bracket Kit 7848842 (NAR)
7846281-01 (EMEA)
"Mounting CAP L2 with a Wall Mounting Kit” on page 21
NOTE: 7846281-01 is included with the CAP L2. 7848842 must be
ordered separately.
Power Supply/Hybrid Fiber Mounting Kit 7774354-xx "Mounting a CAP L2 with an AC/DC Power Supply Kit” on page 24
240W Local AC Power Supply Kit
"Mounting a CAP L2 with an AC/DC Power Supply Kit” on page 24
no AC Input Cord 7775087-xx
with AC Input Cord 7809798-xx
for Plenum Space 7809823-xx
Table 6. Function of the CAP L2 Connectors and LED (4 antennas) (Continued)
Ref # Label Description Function