Installation Guide

CommScope ERA
®
CAP L2 with Fiber Interface M0203A9B_uc
Page 8 © September 2022 CommScope, Inc.
Document Overview
Maximum Output Power Levels
Table 3 lists the frequencies and maximum power output for bands supported in the CAP L2 variants.
Required Antenna Distances
Table 3. Maximum Power Output by Frequency
Band Radio Module Number DL Frequency Range
Power Output
[dBm]
6 Radio Module L2 B71 619.5 - 649.5 MHz 19
7E
Radio Module L2 B12 +13+14
731.5 - 753.5
748.5 - 753.5 MHz
760.5 - 765.5 MHz
19
7- 8
N/A
758 – 791 MHz
791 – 821 MHz
19
9 N/A 925 - 960 MHz 19
17 E Radio Module L2 B66 2110 – 2170 MHz 21
18 N/A 1805 - 1880 MHz 21
19 Radio Module L2 B25 1932.5 - 1992.5 MHz 21
21 N/A 2110 - 2170 MHz 21
23 Radio Module L2 B30 2352.5 - 2357.5 MHz 19
23 T N/A 2350 - 2390 MHz 21
25 T Radio Module L2 B41 2498.5 - 2687.5 MHz 21
26 N/A 2620 - 2690 MHz 21
80- 85
Radio Module L2 B5+27
864.5 - 866.5 MHz
871.5 - 891.5 MHz
19
35L T N/A 3410 – 3640 MHz 23
35H T N/A 3570 – 3800 MHz 23
C- Ba nd N/A 3700 – 3980 MHz 23
NOTE: The output power of the internal Radio Module is 3 dB higher than the ANT Port due to the
combiner.
Table 4. Required Antenna Distances
Minimum Distance Between Antennas and All Persons (DL)
CAP L2 Model Antenna Gain
without Cable
Loss [dBi]
FCC ISED
Meters Inches Meters Inches
CAP L2 6E/7E/80-85 9 0.20 7.88 0.24 9.45
CAP L2 17E/19/23/25T 9 0.20 7.88 0.20 7.88
CAP L2 C-Band 9 0.22 8.84 N/A N/A
NOTE: The Maximum Antenna Gain calculation considers the Radio Module in the CAP L2 system is without loss,
except for the internal combiner.