User's Manual Part 3

M0201AA ION
®
-E Series Hardware Installation Guide
© June 2017 CommScope, Inc. Page 111
Installing CAP Ls
Connect the CAP L Cables
ThetypeofcablesusedandhowtheCAPLconnectsintothesystemisdependentontheCAPLtype.Follow
thecablinginstructionsthatapplytotheunittypethatyouareinstalling.
• "CableaCAPLwithanOpticalFiberInterface”onpage111
• "CableaCAPLwithaCopperInterfaceandPoweroverCategory6ACable”onpage114
• "CableaCAPLwithaCopperInterfaceandPoweroverEthernet”onpage116
Cable a CAP L with an Optical Fiber Interface
Figure7-13identifiestheconnectorsonaCAPLwithanOpticalFiberInterface;correspondingcablesand
connectorsareshown.
CAUTION! Do not remove caps from any of the connectors until instructed to do so.
Figure 7-13. Connectors on a CAP L with an Optical Fiber Interface
ANT
1
ANT
2
Vdc
Power
connector
Opcal
Port
2
Opcal
Port
1
Auxiliary
port