User's Manual Part 3

ION
®
-E Series Hardware Installation Guide M0201AA
Page 106 © June 2017 CommScope, Inc.
Installing CAP Ls
Wall Mount a CAP L Using a 240W AC/DC Power Supply Kit (PN 7775087-00)
Figure 7-10. CAP L with a Power Supply / Hybrid Fiber Mounting Kit
1 Refertoandobserveallcautionslistedin"MountingCautions”onpage95.
2 Referto"DeterminetheCAPLMountingSite”onpage90todeterminethemountinglocation,whichmust
beabletosupporttheweightanddimensionsoftheCAPL.
3 Referto"MountingOrientation”onpage93todeterminethemountingorientationoftheCAPL.
4 Followthestepsin"UnpackandInspecttheCAPLandOptionalAccessories”onpage96.Table7-8lists
the240WAC/DCPowerSupplyKitcomponents.
Table 7-8. 240W AC/DC Power Supply Kit Components (PN 7775087-00)
Quantity Part Number Component
1 7771350 Wall Mounting Bracket
2 7771351 Angled Mounting Brackets
1 7774061 Local Power Jumper Cable Assembly
1 7774356 48V, 240W AC/DC Power Supply Unit with Junction Box
4 100762-1 M8x16 flange-head screws
6 100901-50 M6-1.0 x 14mm screws
4 100907-126
Local Power Jumper cable
OAP Close-Coupled Power Supply Mounng Kit
OAP Vdc Power connector
48V, 240W AC/DC Power Supply
Unit with Juncon Box