User's Manual Part 3

ION
®
-E Series Hardware Installation Guide M0201AA
Page 120 © June 2017 CommScope, Inc.
CAP L Maintenance
Remove a CAP L from a Wall Mount
ShouldyouneedtoremovetheCAPLfromthewallmount,dothefollowing:
1 WhilesecurelysupportingtheCAPL,pressbothreleasesinwardtowardstheCAPL.
2 PresstheredpowerswitchbuttonontheCAPLtoshutitdown.TheredbuttonmustbepressedBEFORE
disconnectingtheCat6Acables.TheblueLEDwillturnoffwhentheunitshutsdown.TheCAP
Lmayalso
beshutdownviasoftwarepriortodisconnectingthecables.
3 UnplugtheCAPLcables.
4 Ifagroundwireisinstalled,loosenthegroundingscrewandremovethegroundwire.
Release tab
Wall Bracket