User's Manual Part 2

ION
®
-E Series Hardware Installation Guide M0201AA
Page 102 © June 2017 CommScope, Inc.
Installing CAP Ls
g Ifasecondspliceholderisneeded,itcanbeassembledusingthe
M4insulatingwasher(PN
7696866)andtwoM4plainwashers
(PN
7143057),asshowntotheright.Therequiredscrewisa
PTK30
x12(PN7696787).
h MounttheinternalsupportSpliceBoxION-URU
(PN
7683602-00)usingthreePTK30x6(PN7692771)screws.
i Removethesealingnutandrubberofthecableglandandinsert
theopticalcables.
j Placeeachcableintooneofthegroovesofthesealinsert
(PN
7682791-00).
k Pressthesealinsertintotheclampringopening.
l Fixtheopticalcablesinsidetheboxusingonecabletie
(PN
7582282)andtightthesealingnut.