User's Manual Part 2

M0201AA ION
®
-E Series Hardware Installation Guide
© June 2017 CommScope, Inc. Page 101
Installing CAP Ls
b InserttheSpliceHolder(PN7582294)andfastenitusinga
PTK
30x6screw(PN7692771)andoneM4washer
(PN
7143057).
c Striptheinsulationofthecompositecablefor100cmandthefibersfor90cm,andthenshorten
thecoppercablesto25cm.
d Insertthecompositecableinthefirstcableglandandseparate
themulti-fiberscablefromthecopperwires.Itisnecessaryto
removethenuttoperformthisaction.Thecablemustbefed
throughthenutandithastoberetightenedoncefinished.
e Bendthesplicedfibersusingthecornerguidesandfixthe
splicestothespliceholder.
f Bendtheopticalcablesasshowinthepicturetotheright.