User's Manual Part 2

ION
®
-E Series Hardware Installation Guide M0201AA
Page 70 © June 2017 CommScope, Inc.
UAP Maintenance
Remove a UAP from a Wall Mount
ShouldyouneedtoremovetheUAPfromtheceilingmount,dothefollowing:
1 WhilesecurelysupportingtheUAP,pressbothUAPreleaseinwardtowardstheUAP.
2 PresstheredpowerswitchbuttonontheUAPtoshutitdown.TheredbuttonmustbepressedBEFORE
disconnectingtheCAT6Acables.TheblueLEDwillturnoffwhentheunitshutsdown.TheUAPmayalso
beshutdownviasoftwarepriortodisconnectingthecables.
3 UnplugtheMAINandAUXCat6Acables.
4 Ifagroundwireisinstalled,loosenthegroundingscrewandremovethegroundwire.
Release tab
Wall Bracket