User's Manual Part 2

M0201AA ION

-E Series Hardware Installation Guide

UAP Maintenance

UAP MAINTENANCE

ThefollowingsectionstellyouhowtoremoveaUAPfrommountingbrackets,andprovidespreventative

maintenance.

Remove a UAP from a Ceiling Mount

ShouldyouneedtoremovetheUAPfromtheceilingmount,dothefollowing:

1 WhileholdingtheUAPwithbothhands,pressbothUAPreleaseslidesinwardtowardstheUAP.

2 PresstheredpowerswitchbuttonontheUAPtoshutitdown.TheredbuttonmustbepressedBEFORE

disconnectingtheCAT6Acables.TheblueLEDwillturnoffwhentheunitshutsdown.TheUAPmayalso

beshutdownviasoftwarepriortodisconnectingthecables.

3 UnplugtheMAINandAUXCat6Acables.

4 Ifagroundwireisinstalled,loosenthegroundingscrewandremovethegroundwire.