User's Manual Part 2

ION
®
-E Series Hardware Installation Guide M0201AA
Page 68 © June 2017 CommScope, Inc.
Installing UAPs
Cascading a UAP, UAP-X, or UAP-N25
TwoUAPscanbeoperatedincascademodetoprovideLTEMIMOcoverageortosupportadditionalbands,
asshownin
Figure6-3.TocascadeUAPs,connectaCAT6AcablefromtheAUXportoftheprimaryUAP(A)
totheMAINportofthesecondaryUAP(B).TheAUXportofthesecondary(B)UAPisnotusedincascade
mode.
ItisalsopossibletousethecombinationofaUAPandUAP-Xincascademode,however,allspacingand
externalantennaplacementguidelinesforUAPandUAP-Xunitsstillapply.
TheconnectionofEthernetdevices,however,isnotsupportedforcascadedUAPs.
Figure 6-3. UAP Cascade Options
From UAP(A) AUX port to UAP(B) MAIN port
Primary UAP (A)Secondary UAP (B)
To RFD card port