Installation Guide
Table Of Contents
- Table of Contents
- Document Overview
- ERA System Overview
- CAP H Overview
- Safely Working with a CAP H
- Installing a CAP H
- Using the Status LED to Determine State of the CAP H
- Maintenance
- Contacting CommScope
CommScope ERA
®
High Power Carrier Access Point Installation Guide M0201AKG_uc
Page 12 © February 2021 CommScope, Inc.
CAP H Overview
Connectors and Status LED on Models with Three Antenna Connectors
• Figure 6 shows the connectors on an AC version with three antenna connectors.
• Table 4 on page 13 maps the callouts in Figure 6 and describes the connectors and STATUS LED.
• There is no DC version for CAP H.
Figure 6. Location of Connectors and Status LED on AC Version with Three Antenna Connectors
Do not remove caps from any of the connectors until instructed to do so.
1
2
3
4
6
7
5
10
9
8