Installation Guide

M0201AKC CommScope Era
™
High Power Carrier Access Point Installation Guide
© April 2019 CommScope, Inc. Page 1
DOCUMENT OVERVIEW
This installation guide provides a product overview and installation instructions for the High Power Carrier
Access Point (CAP H), which allows transmission betwee
n CommScope Era™ equipment, antennas, and
Ethernet devices (such as WiFi and IP cameras). Table 1 lists the CAP H models that this installation guide
supports.
Table 1. Supported CAP H Models
Part Number
1
Model Name Designed for use in…
7772983-xxxx CAP H 8/9/18/21 EMEA
7821740-xxxx CAP H 9/18/21/26 EMEA
7825719-xxxx CAP H 7E/80-85/17E/19 North America
7825730-xxxx CAP H 17E/17E/19/19 North America
1 The “-xxxx” suffix identifies specific features or options for C
AP H variants including whether
the CAP H has an AC or DC power supply. Contact your local sales representative for further
information. See also "CommScope Part Numbers" on page 3.
For information on how to find the minimum software requirements for Era hardware, refer to
"Hardware to Software Mapping Information" on page 54.
Document Revision History
This is the second release of the CommScopeEra
™
HighPowerCarrierAccessPointInstallationGuide, which
• ad
ds support for the CAP H 7E/80-85/17E/19 and the CAP H 17E/17E/19/19
• up
dates
– "CAP H Connectors and Status LED" on page 6
– "CAP H Installation and Cascade Rules" on page 20
– "Ground the CAP H" on page 32
– "Connect the Antenna Cable" on page 34
– "Connect the MAINS Power and Power on an AC CAP H" on page 42