Installation Guide

Table Of Contents
M0201AKC CommScope Era
High Power Carrier Access Point Installation Guide — Preliminary
© April 2019 CommScope, Inc. Page 19
Safely Working with a CAP H
Equipment Symbols Used / Compliance
Please observe the meanings of the following symbols used in our equipment and the compliance warnings
listed in Table 5.
Table 5. Compliance Labels
Symbol Compliance Meaning
FCC
For industrial (Part 20) signal booster:
WARNING: This is NOT a CONSUMER devi
ce. It is designed for installation by FCC LICENSEES and
QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to
operate this device. Unauthorized use may result in significant forfeiture penalties, including
penalties in excess of $100,000 for each continuing violation.
For (Part 90) signal booster:
WARNING: This is NOT a CONSUMER devi
ce. It is designed for installation by FCC LICENSEES and
QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to
operate this device. You MUST register Class B signal boosters (as defined in 47 CFR 90.219) online
at www.fcc.gov/signal-boosters/registration. Unauthorized use may result in significant forfeiture
penalties, including penalties in excess of $100,000 for each continuing violation.
ISED
WARNING: This is NOT a CONSUMER device.
It is designed for installation by an installer approved
by an ISED licensee. You MUST have an ISED LICENCE or the express consent of an ISED licensee to
operate this device.
AVERTISSEMENT: Ce produit N'EST PAS un appareil de CONSOMMATION. Il est conçu pour être
installé par un installateur approuvé par un titulaire de licence d'ISDE. Pour utiliser cet appareil,
vous DEVEZ détenir une LICENCE d'ISDE ou avoir obtenu le consentement exprès d'un titulaire de
licence autorisé par ISDE.
CE
To be sold exclusively to mobile operators o
r authorized installers - no harmonized frequency
bands, operation requires license. Intended use: EU and EFTA countries.
Indicates conformity with the RED directive 2014/53/EU and/or RoHS d
irective 2011/65/EU.
CE
Indicates conformity with the RED directive 2014/53/EU and RoHS
directive 2011/65/EU certified
by the notified body no. 0700.
Required Antenna Distances
Table 6. Required Antenna Distances
CAP H Model
Antenna gain
without cable
lo
ss [dBi]
Minimum Distance
FCC ISED
m inches m inches
CAP H 17E/17E/19/19 9 2.243 88.31 3.256 128.19
CAP H 7E/80-85/17E/19 9 2.705 106.5 3.923 154.45