Installation Guide
Table Of Contents
- Table of Contents
- Document Overview
- Era System Overview
- CAP H Overview
- Safely Working with a CAP H
- Installing a CAP H
- Using the Status LED to Determine State of the CAP H
- Maintenance
- Contacting CommScope
CommScope Era
™
High Power Carrier Access Point Installation Guide M0201AKC
Page 12 © April 2019 CommScope, Inc.
CAP H Overview
CAP H Accessory Options
The following sections describe hardware options for the CAP H.
Mounting Kits
You must order one of following mounting kits, as appropriate for this installation. The mounting kit must be
ordered separately; it is not contained with the standard equipment.
• Wall Mounting Kit (CommScope Part Number 7661581), includes the following:
– One Top Mounting Bracket
– One Bottom Mounting Bracket
– Four M8x25 screws
– Four split-lock washers
– Four 8.4 mm flat washers.
• Pole Mounting Kit (CommScope Part Number 7661538), includes the following:
– One Top Mounting Bracket with Screw Band
– One Bottom Mounting Bracket with Screw Band
– Two Worm-gear clamps
– Four M8x25 screws
– Four split-lock washers
– Four 8.4 mm flat washers.