User Manual

45
MN024-08
3.3. Case B remote unit
Dimensions and Weight:
Dimensions: 38 x 240 x 240 mm
(1.5 x 9.4 x 9.4 inches)
Weight : please refer to the Bulletin
PA-100595EN or to the remote unit dedicated bulletin in order to
know the updated data about
the weight of your case L remote unit
TFAx
CaseB
Module name:
Remote Unit
TFAx
Case B
Power
Supply
connector
DL optical
port
(SC-APC)
External
alarm
connectors
Warm side
RF
antenna
port (N-f)
Green LED = power on
Red LED = major
alarm
RF auxiliary
channel output
(
SMA-f
)
UL optical
port
(SC-APC)
RF
antenna
port (N-f)
RF auxiliary
channel input
(
SMA-f
)
RF ports:
• 2 RF antenna ports, transmitting/receiving signals to/from
distributed antennas. RF antenna ports are duplexed N-female
connectors. These RF ports can be connected to the antennas
either directly (ie. through RF jumper cables) or through
splitters, thus allowing more antennas to be fed. Unused RF
ports have to be terminated with a 50 Ω load.
• 1 RF auxiliary input and 1 auxiliary output (designed to
receive and transmit additional signals). Auxiliary input and
output ports are SMA-female connectors.
Optical ports:
• 1 optical output port, transmitting UL signals to TFLN
master optical TRX
• 1 optical input port, receiving DL signals from TFLN
master optical TRX
Fig. 3.17: 3D-drawing of
a Case B remote unit