User Manual

25
MN024-08
3.2. Case A remote unit
Dimensions and Weight:
Dimensions: 38 x 240 x 200 mm
(1.5 x 9.4 x 7.9 inches)
Weight : please refer to the Britecell Plus bulletin
PA-100595EN or to the
remote unit dedicated bulletin in order to know the updated data
about the weight of your case A remote unit
An external power supply is provided only for Case A remote unit TFAM20.
TFAx
CaseA
RF ports:
• 2 RF antenna ports, transmitting/receiving signals to/from
distributed antennas. RF antenna ports are duplexed N-female
connectors. These RF ports can be connected to the antennas
either directly (ie. through RF jumper cables) or through
splitters, thus allowing more antennas to be fed. Unused RF
ports have to be terminated with a 50 Ω load.
• 1 RF auxiliary input and 1 auxiliary output (designed to
receive and transmit additional signals). Auxiliary input and
output ports are SMA-female connectors.
Power
Supply
connector
DL optical
port
(SC-APC)
External
alarm
connectors
Warm side
RF
antenna
port (N-f)
Green LED = power on
Red LED = major
alarm
RF auxiliary
channel output
(
SMA-f
)
UL optical
port
(SC-APC)
RF
antenna
port (N-f)
RF auxiliary
channel input
(
SMA-f
)
Module name:
Remote Unit
TFAx
Case A
Fig. 3.4: 3D-drawing of
a Case A remote unit