User Manual

156
User Manual
Warnings
The overall input power must not exceed +30dBm.
As the module is band dependent be sure to choose the right single band
version.
TDPX Installation
Since the TDPX module doesn’t require any power supply it can be housed
either in an active or a passive TPRN sub-rack.
1. Unpack the kit which include
 1 TDPX
 2 RF jumpers (SMA-m), 2 x 35cm
2. Carefully insert the TDPX module in any of the TPRN sub-rack slots and
lock the 4 screws on the front corners.
3. Connect RF cables to common, UL and DL ports, according to what planned
by designer. Use a specific torque wrench to fix each cable to relevant
ports.
TDPX