User Manual
152
User Manual
¾ TLTN combines the DL inputs coming from 3 different donor sources
(carrying different services) into an output signal entering the TFLN
master optical TRX
¾ TLTN filters the UL input coming from the TFLN master optical TRX
into 3 UL outputs entering 3 different donor sources (carrying
different services)
TLTN insertion loss
TLTN insertion loss = 3.0 ± 0.5dB
When designing the system, remember to take into account the insertion loss
of the TLTN.
Warnings
The overall input power must not exceed +27dBm
TLTN Installation
Since the TLTN module doesn’t require any power supply it can be housed
either in an active or a passive TPRN sub-rack.
1. Unpack the kit which include
1 TLTN
2 RF jumpers (SMA-m), 2 x 40cm
2. Carefully insert the TLTN module in any of the TPRN sub-rack slots and lock
the 4 screws on the front corners.
3. Connect RF cables to UL and DL ports, according to what planned by
designer. Use a specific torque wrench to fix each cable to relevant ports.
TLTN