User's Manual

U
SER
´
S MANUAL FOR BAND SELECTIVE REPEATERS
MR
X
03P
User'sManual.doc Id.-No.:154999 Page 26 22-Jan-01
Dismount the mounting brackets which are screwed to the housing with four socket
head cap screws M8x16 and two tire bolts (see figure 4-1 Installation drawings of a
repeater).
∫ Fasten the mounting kits and the mounting brackets to the pole or mast.
∫ Attach the upper two socket head cap screws M8x16 to the repeater housing.
∫ Hang the repeater into the mounting brackets.
∫ Fasten the lower two socket head cap screws M8x16 and the two tire bolts.
Make sure that there is free access to the electrical connections and to the individual
units inside the cabinet while the door of the repeater is open (clearance distance of
1 m is recommended). The allowed bending radius of the connected cables must not
be exceeded.
F Note: Two Mikom pole mounting kits are required to mount the repeater to
a pole or a mast.