User Manual

User’s Manual for Repeater MR303D Varia
M0041A8B.doc Id.-No. 153114 Page 15 26-Oct-2000
Ø Connect one RF cable to the SMA
connector to/from mobile.
Ø Connect one RF cable to the SMA
connector to/from the BTS.
Ø Connect the DC cable to the repeater
DC connector.
To avoid excess strain on the cables, the
cables must be fastened to the fixing straps
with cable clamps.
E.g.: Horizontal mounting
The cables can be fed through the
repeater’s housing at one of the two semi-
holes provided to adapt the position of the
cable to the mounting position of the
repeater.
Ø Open off the required semi-hole by
removing the respective break-off-part
with pliers.
Break-off
parts
SMA connector
to/from mobile
SMA connector
to/from BTS
DC connector
Fixing straps