User’s manual for Remote Unit MORx01B (i) (Power) User’s manual for channel or band selective Remote Unit MORx01B (i) (Power) Manual update MOR801.
User’s manual for Remote Unit MORx01B (i) (Power) HEALTH AND SAFETY WARNINGS Installer Warning: Any over the air radiated use of this product is intended to be used with either Roof Top (Building-mount) or Pole Mounted (Nonbuilding-mount) Antennas.
User’s manual for Remote Unit MORx01B (i) (Power) F F Note: The electrical installation has to be performed in accordance with the safety regulations of the local authorities. Due to safety reasons the electrical installation must be performed by qualified personnel. The cover of this unit should not be opened while power is applied.
User’s manual for Remote Unit MORx01B (i) (Power) 1 INTRODUCTION 1.1 Intended purpose Cellular telephone systems transmit signals in two directions between base stations and mobile telephones within the signal coverage area. If weak signal transmissions occur within the coverage area because of indoor applications, topological conditions or distance from the transmitter, a repeater is used to extend transmission range.
User’s manual for Remote Unit MORx01B (i) (Power) 1.3 Modular design F Note: It is not possible to combine MRx01 units / modules with other MRx01 units / modules without verifying FCC Approval and RF Exposure Compliance ( See health and Saftey section of this manual). For any clarification, please refer to FCC rules, 47 CFR ch. I, part 1.1307 The MRx01B repeater’s modular design provides the flexibility in addressing present and future system needs. Each repeater is custom configured.
