User Manual

User’s Manual for Remote Unit
MMR8L L
Page 34 M0106ASB.doc
7.2. GENERAL
• To open the cabinet of the remote unit, first
dismount the locker by unlocking it with the key
(which is part of the delivery) and pulling it out
carefully.
figure 7-1 Locker with key
figure 7-2 Front and top
cover screws
• Then remove the front cover by loosening the
four M5 socket head cap screws (circle-marked
in figure 7-2 on the left). Do not remove those
screws. When they are loosened, the front cover
can be taken off.
• To open the cabinet, unscrew the three M5
socket head cap screws (captive) of the top
cover of the remote unit.
figure 7-3 Position of mains
power switch
• Set the mains power switch inside to On (I):
• Close the cabinet.
) Note: Do not forget to reinstall the front cover
afterwards to ensure safe operation.
• Check the status of the LED. Ensure it is showing
a green light.
Three top
cover
screws
Locker
Front
cover
Mains
power
switch