User Manual

5 Commissioning
ID No: 163511 Page 27
5. COMMISSIONING
5.1. GENERAL
Read the health and safety warnings in chapter 1.2 Health and Safety Warnings as
well as the description carefully to avoid mistakes and proceed step by step as
described!
• Do not operate the remote unit without terminating the antenna connectors.
The antenna connectors may be terminated by connecting them to their
respective antennas or to a dummy load.
• Only qualified personnel should carry out the electrical, mechanical,
commissioning and maintenance activities that require the unit to be powered
on when open.
• When opening the remote unit do not damage the warranty labels on the
internal devices. The warranty is void if the seals are broken.
• Ensure that all connections have been performed according to chapter 4.2.2
Connections.
5.2. AUTO-LEVELLING
For a proper operation of the auto-levelling function, a defined level has to be set at
the optical interface (DL) of the master unit. For details refer to the software manual
of the master unit.