User's Manual

8 Appendix
ID No: 159967 Page 41
800 MHZ section
Frequency range
869 - 894 MHz (AMPS) or
851 - 869 MHz (LMR)
RF output power (per carrier) Analogue TDMA CDMA iDEN
⇒ 2 carriers
+40 dBm +37 dBm +34 dBm +34 dBm
⇒ 4 carriers
+36 dBm +32 dBm +31 dBm +31 dBm
⇒ 8 carriers
+32 dBm +29 dBm +28 dBm +28 dBm
⇒ 16 carriers
+30 dBm +26 dBm +25 dBm +25 dBm
⇒ 32 carriers (CDMA 20 carriers)
+26 dBm +23 dBm +24 dBm +22 dBm
Spurious emissions < -13 dBm
DL output tolerance over frequency
±1.0 dB
D
L
DL output tolerance over temp.
±1.5 dB
Frequency range
824 - 849 MHz (AMPS) or
806 - 824 MHz (LMR)
IICP
3
optimized NF optimized
Input ICP3 1.5 dBm -9 dBm
Noise figure 13.5 dB 5.5 dB typical
U
L
Gain 2 dB 16 dB
1900 MHZ section
Frequency range 1930 – 1990 MHz
RF output power (per carrier) GSM TDMA CDMA
⇒ 2 Carriers
+39 dBm +36 dBm +33 dBm
⇒ 4 Carriers
+35 dBm +31 dBm +30 dBm
⇒ 8 Carriers
+31 dBm +28 dBm +27 dBm
⇒ 16 Carriers
+28 dBm +25 dBm +24 dBm
⇒ 32 Carriers
+25 dBm +22 dBm +21 dBm
Spurious emissions < -13 dBm
DL output tolerance over frequency
±1.0 dB
D
L
DL output tolerance over temp:
±1.5 dB
Frequency range 1850 - 1910 MHz
IICP
3
optimized NF optimized
Input ICP3 1 dBm -11 dBm
Noise figure 14 dB 5.5 dB typical
U
L
Gain 2 dB 16 dB
* All data are valid for systems in a thermally steady state; i.e. after approx. 40 min of operation.
All data is subject to change without notice!