Manualshelf

User's Manual

ManualsBrandsAndrew Wireless Innovations Group ManualsElectronicsBroadband PCS repeater
71727374757677787980
4. Setting Up for Initial Operation
EAC-2100 Manual: (Draft, 02/01) Page 4-27
4.6.4 Setting Time and Report Values
The EAC-2100 keeps various statistics of calls handled by the booster and
alarms that have been logged:
• Running totals of the number and duration of calls handled per board can
be displayed using the DCS command.
• Incremental totals of certain call statistics can be displayed using the DCH
command.
• Alarms logged since the last system reset can be displayed using the ALA
command.
The EAC-2100 clock is used in updating these statistics. To set the clock and
reset the report values to 0, complete the following steps:
1. At the > prompt, type TIM to access the clock. Enter the current date and
time.
2. Type DCH=0 to reset the Display Call History parameter.
3. Type DCS=0 to reset the Display Call Statistics parameter.
4. Type ALA=0 to reset the Alarm Report parameter.