User's Manual

4. Setting Up for Initial Operation
EAC-2100 Manual: (Draft, 02/01) Page 4-20
4.6.8 Programming Alarms and Thresholds (Continued)
5. If external digital inputs are connected to the EAC-2100 external
alarm/controls ports, type L <CR> to access the External Digital Inputs
menu.
Choose the number of the input(s) connected and program the alarm state.
You may specify DISABLED, HIGH or LOW.
6. If external digital outputs are connected to the EAC-2100 external
alarm/controls ports, type M <CR> to access the External Digital
Outputs menu.
External Digital Inputs Menu
PA 1−6 Cage:
1 Ext. Digital Input 1 Alarm State DISABLED; Input Currently Low
2 Ext. Digital Input 2 Alarm State DISABLED; Input Currently Low
3 Ext. Digital Input 3 Alarm State DISABLED; Input Currently Low
4 Ext. Digital Input 4 Alarm State DISABLED; Input Currently Low
PA 7−11 Cage:
5 Ext. Digital Input 1 Alarm State DISABLED; Input Currently Low
6 Ext. Digital Input 2 Alarm State DISABLED; Input Currently Low
7 Ext. Digital Input 3 Alarm State DISABLED; Input Currently Low
8 Ext. Digital Input 4 Alarm State DISABLED; Input Currently Low
External Digital Outputs Menu
PA 1−6 Cage:
1 Ext. Digital Output 1 State....................................................................... LOW
2 Ext. Digital Output 2 State....................................................................... LOW
3 Ext. Digital Output 3 State ....................................................................... LOW
4 Ext. Digital Output 4 State....................................................................... LOW
PA 7−11 Cage:
5 Ext. Digital Output 1 State....................................................................... LOW
6 Ext. Digital Output 2 State....................................................................... LOW
7 Ext. Digital Output 3 State....................................................................... LOW
8 Ext. Digital Output 4 State....................................................................... LOW