User's Manual

4. Setting Up for Initial Operation
EAC-2100 Manual: (Draft, 02/01) Page 4-16
4.6.6 Setting the Donor DTC Channels (Continued)
3. Enter channels in the list, as described below. A given channel may be
entered in only one list. The system will support a maximum of 105 total
channels in all four lists (A, B, C, and M).
A. To add a channel, type A [channel number] <CR>.
B. To add multiple channels, after the A enter multiple channel
numbers separated by commas or spaces. If you enter a plus (+) sign
before a single channel entry, 15 channels will be added, spaced 21
channels apart, starting with the channel entered. You can then delete
extra channels as necessary.
C. To remove a channel from the list, type R [channel number] <CR>.
D. To remove multiple channels, after the R enter multiple channel
numbers separated by commas or spaces. To remove the entire list,
type ALL.
4. To return to the DTC Channels Menu, type X <CR>.