Manualshelf

User's Manual

ManualsBrandsAndrew Wireless Innovations Group ManualsElectronicsBroadband PCS repeater
51525354555657585960
4. Setting Up for Initial Operation
EAC-2100 Manual: (Draft, 02/01) Page 4-4
4.3 Connecting a Local Terminal
The EAC-2100 communicates with a conventional ASCII, RS232 terminal. Connect
the terminal as follows.
1. Using the cable provided in the tuck pack, connect the terminal to the 9-pin D-sub
connector located on the front of the controller module.
Figure 4-4. Location of Local Terminal Connector