User's Manual

3. Installing the Hardware
EAC-2100 Manual: (Draft, 02/01) Page 3-4
3.2 Mechanical Installation
3.2.1 Uncrating the Equipment
The container includes these items:
• The EAC-2100 unit
• EAC-2100 manual
Remove the shipping material from around the cabinet. Check the contents and
take care that no hardware or manuals are misplaced.
3.2.2 Mounting the Cabinet
The cabinet may be mounted on the wall either by using the wall bracket, or on
a concrete or other pad using the pedestal mount.
Four holes are provided in the inside bottom flange of the pedestal for bolting
the cabinet to the pad. The preferred mounting method is to drill holes in the
pad and use expandable anchors. Alternatively, bolts can be cast into the
concrete. Mount the cabinet to the pad as follows:
Figure 3-4. Pedestal Footprint
(UPDATE. Also add mounting dimensions of the wall bracket)