Manualshelf

User's Manual

ManualsBrandsAndrew Wireless Innovations Group ManualsElectronicsBroadband PCS repeater
11121314151617181920
Quick Start Checklist
AMPS EAC-2100 Manual: Vol. I, Installation Procedures (27-7655-2, 12/95) Page viii
Programming Initial Parameters (Continued)
12. From the command entry level >, use the TIM command to set the date and
time.
13. From the command entry level >, enter DCS=0, DCH=0, and ALA=0 to reset
the report values.
Completing the Installation
1. Connect the antennas. The unit is now operational!
2. Type SCS <CR> and make some calls. You will see your MIN displayed on
call originations and answers.
3. Connect the handset to the connector on the front of the mobile shelf (see
Section 5).
4. Program hand-in/hand-back thresholds as desired (see Section 6).
5. After completing installation and setup, secure the cabinet door.