User's Manual Part 1

• Do not touch the connector tip. Clean it with a proper tissue before inserting each connector into

the sleeve. In case connector tips need to be cleaned, use pure ethyl alcohol.

TFAxxx installation instructions

The TFAxxx kit includes:

A. 1 remote unit TFAxxx

B. a 50 Ω load

and according to the chosen model

C. an external power supply adapter (85-264 Vac or -48 V

)

D. mains plug or -48 plug

First, drill into the wall so as to install four M4 screw anchors (not included) according to the

dimensions indicated by the installation drawing in fig. 6, 7.

Fix the TFAxxx remote unit to the wall by firmly screwing the anchors.

In case you have purchased a TKA installation kit

so as to preserve your TFAxxx remote unit, a splice

holder is provided with the kit:

1. Fix the splice holder inside the splice tray.

2. Splice the optical fibres and close the splice tray.

3. Take care not to bend the fibres too much.

4. Fix the splice tray inside the splice box.

Note:

If you use your own splice box fix the splice box beside the

TFAxxx

Connect the TFAxxx unit to mains, through a power supply

cable and itsexternal adapter.

OPTIMAL

WRONG

MN024-04