Install Manual

BRITECELL System Manual MN010-04 June 2003 Page 58 of 78
The company has a policy of continuous product development and improvement and we therefore
reserve the right to vary any information quoted without prior notice.
56. Installation and cabling
56.1. Location
Britecell transmits low-power radio signals in a given area. It is important to
respect the simple installation instructions as follows, in order to achieve a good
communication quality and to avoid malfunctions, which could bring to a self-
inhibition of the device.
The TPA passive antenna’s placing should be chosen in order to grant the
maximum indoor radio coverage. The largest field is located perpendicular to the
TPA. Antennas have to be mounted at a minimum height of 2.5m from the ground.
They should not be placed near trees, plants, metal grids or other obstacles, which
could disturb their functioning and lead to a worsening of the device's
performance.
Fig. 44 antenna position
Fig. 45 radiation pattern
2.50 m
COVERAGE
ANTENNA
Minimum Coverage
Direction
Maximum Coverage
Direction
CORRECT
WRONG