Install Manual

BRITECELL System Manual MN010-04 June 2003 Page 53 of 78
The company has a policy of continuous product development and improvement and we therefore
reserve the right to vary any information quoted without prior notice.
51.2. Power supply and grounding
51.2.1. Universal mains (85-264VAC, 50/60Hz)
Fig. 38 -Mains connector
51.2.2. DC negative supply –72 to –36 VDC.
DC connector and part number:
Fig. 39 - VDC connector
51.3. RF combined ports
Antenna port must be directly connected to radiating antennas through RF
jumpers.
TFA port must be connected to combined port of TFA remote unit.
52. Start up
A preliminary verification of TFB correct operation is:
• power-up the TFB
• verify the following led status
LED Colour Status
Alarm Red OFF if internal operations ok
Power On Green ON
For a full functionality test please refer to the system start-up section
Ground
Mains
Mains